The specific steps to create a secondary map are as follows:

1. Ensure the robot vacuum is in a state where it has completed mapping the current floor and has saved it as the main map. Move the robot vacuum to the new floor that needs cleaning and place it in a suitable starting position on that floor.

2. Open the Narwal Freo App, find the option to create a secondary map in the map management settings, and follow the app instructions step by step. Allow the robot to perform a complete cleaning on the new floor to build the map.

Device Homepage > Map > Map Management > Create a secondary map

3. Once the secondary map is created, you can move the robot to the corresponding floor and select the appropriate floor map to start multi-floor cleaning tasks. Please note that we do not recommend moving the base station and robot together to another floor for mapping.  If you do move the base station, make sure to place it back in its original position.

Q: What should I pay attention to when creating a secondary map?

A: Ensure your robot vacuum has sufficient battery to avoid interruptions during the creation process due to low battery. Additionally, place the robot in an open area on the new floor with minimal obstacles to allow it to start mapping smoothly.

Q: How many secondary maps can I add to the robot?
A: You can add up to 4 secondary maps for different floors or rooms.

Tutorial Video: