How It Works:
🚫 When Stairless Mode is ON - Robot will not detect stairs, ledges, or drop-offs, but improving obstacle climbing – Better at traversing
🛡️ When Stairless Mode is OFF - Active cliff protection and the robot will detect stairs/ledges over 10cm height and automatically stop & redirect to prevent falls.
Key Differences
| Feature | Stairless Mode ON | Stairless Mode OFF |
|---|---|---|
| Stair Detection | ❌ Disabled | ✅ Active |
| Obstacle Climbing | ⭐ Enhanced | Standard |
| Safe for Stairs? | ❌ No | ✅ Yes |
⚠️ Safety Reminders:
1. DO NOT enable in multi-level homes (risk of falls!)
2. ONLY activate if your space has:
▪ No stairs/drops
▪ No balconies/open ledges
▪ Flat floors throughout
How to Enable or Disable the mode? Please follow below steps on your Narwal Freo App
1. Open the Narwal Freo App and navigate to the Device Homepage.
2. Tap the Settings icon ⚙️ in the top-right corner.
3. Go to General > Toggle "Stairless Mode" ON to enable it, or toggle it OFF to disable it.