Usage Scope:
1. This product is suitable for hard floors in indoor environments, including waxed floors, stone - milled floors, rubber floors, marble floors, granite floors, terrazzo floors, solid wood floors, composite bamboo floors, and flat surfaces such as various mirror tiles and ceramic tiles.
Using this product on uneven surfaces may not achieve the best results.
2. It is prohibited to suck high - temperature substances (unextinguished cigarette butts, matches, or hot ashes, etc.), ultra - fine substances (such as lime, cement, wood chips, gypsum powder, ashes, carbon powder, etc.), dangerous items (such as solvents, scale removers, etc.), chemical substances (such as acidic substances, cleaners, etc.), and other substances with uncertain physical properties.
3. It is prohibited to use this product to suck detergents, kerosene, gasoline, alcohol, paint, perfume, etc.
These liquids may cause short - circuits, fires, or explosions in the machine.
4. It is prohibited to use this product to suck toners and color powders used inside laser printers and copiers.
These substances may cause fires or explosions in the machine.
5. It is prohibited to use this product to suck sharp objects, such as glass shards, pins, paper clips, stones, gypsum, large pieces of paper, etc. These objects may cause blockages in the machine or scratch the floor.
6. It is prohibited to use the product in an environment with open flames.
7. It is prohibited to bring human hair, clothes, fingers, or other body parts close to the air outlet of the product.
8. It is prohibited to place the power cord near a heat source. Use the power cord carefully to avoid damage, and do not drag or lift the product by the power cord.
9. It is prohibited to incinerate the product. Even if the product is severely damaged, the product battery may explode due to this.
10. This product should not be stored or used in a humid environment. The operating environment temperature is 5 - 40°C. Using it beyond this temperature range is strictly prohibited.
Prohibited Acts:
1. Do not flatten the operating lever when the machine is not in operation to avoid water leakage.
2. Do not rinse the machine body with water to avoid damaging the machine's circuit.
3. Only add the cleaning liquid specified by Narwal officially.
4. Do not scrub the solid waste box with sharp objects to avoid damaging the seal ring.
5. Do not rinse the base with water.
*For more precautions, click here to download the S30 Pro product manual.