* The video demonstrates how to deal with the base station overflow issue by using the Freo X Ultra as an example.
⚡ In short words:
1. Clean the base station and the cleaning tray firstly
2. Check water tanks:
① locking tabs are fully engaged
② sealing strips are not loose
3. Check if the silicone seals are still secure
4. Using any other brand of fragrance or cleaning detergent is not allowed.
🔍 Detailed Step-by-Step Guide
1. Remove the cleaning tray and base station slope pad, then dry any residual water in the base station.
2. Clean the cleaning tray (Freo Z10 Example)
🎬 Video
🗺️ Illustration
3. Extract the dirty water tank to verify its locking tabs are fully engaged. A distinct click must be both heard and felt when pressing the wastewater tank lid into place.
👉 Freo X Ultra Example: Dirty Water Tank Maintenance
4. Check the sealing strips of the clean water tank or dirty water tank to see if they are loose. If loose, press them back into the sealing groove of the tank.
5. Lift both water tanks to check if the silicone seals are secure; if loose, press them back into position.
6. Confirm if any other brand of fragrance or cleaning detergent has been added to the clean water tank.
👉 Can I Use Cleaning Detergent from Other Brands in the Narwal Robot Vacuum or Vacuum Mop?